Energy Storage System Aluminium Liquid Cold Plate
Cooling solution for energy storage systems :
According to the national regulation on electrical grids, the portion of distributed power generation by PV and wind power should not exceed 10% of the electrical grid. An energy storage system is required if it exceeds this percentage. If there is no energy storage system in PV systems or wind power systems, it will result in adverse effects on the electrical grid. When the scale of the wind power systems or PV power generation systems keep increasing and the percentage of PV power within the systems keep increasing, these effects will become non-negligible.
It is known from the analysis of characteristics of PV power generation that the influence of a PV generation system on the electrical grid is mainly due to the instability of PV powers. To ensure the safe, stable, and economical operation of electrical grids, typically it is required to install an energy storage system. As a result, the demands for energy storage systems have increased for the last couple of years.
Specifications
| Item | Energy Storage System Aluminium Liquid Cold Plate |
| Application | electrical vehicles, energy storage system , heat exchanger |
| Size | As your request |
| Technical | brazing alloy cooling plate |
| Alloy | 3003 or customized |
| Temper | O.H14,H16 etc. |
Benefit of using liquid cooling plates:
The safe and cost is the most important for the enegy storage system, if adpot the liquid cold plate for the ESS,
it will bring obvious benefit as below :
1. Power density increased, as well as land utilization.
2. Extend its using life
3. Energy saving than using HVAC
4. Lower cost in installation
Applications industries :
wind power converter
energy storage system
Power battery pack
Motor housing cooling
Power quality SVG
Product Tags:
|
|
Energy Storage System Aluminium Cold Plate 3003 Alloy Insulation Images
|
